Provide year-round corrosion and rust prevention. Removes water without alcohol and helps keep fuel injectors clean. Use with every fill up especially during winter and in warm, wet weather. Treats up to 79 litres.
Formulated for optimum performance for all disc or drum brake systems requiring DOT 3 fluids. Provides protection against brake failure from vapor lock, helps prevent corrosion. Complies with Federal Motor Vehicle Safety Standard No. 116. Meets SAE spec. J1703.
Additives and methanol formula safe for use in all 4-cycle engines. Prevents gas-line freeze-up, rust and corrosion year round. Removes water from fuel system, absorbs moisture in carburetor. Improves engine performance for year-round quick starts. Safe on catalytic converters and fuel injectors. 1 bottle treats up to 10 gallons.
Helps save gas and improves performance by keeping fuel injectors and carburetors clean of harmful deposits. Helps prevent power loss, reduce engine friction and maintain optimum engine efficiency. Use regularly with fill up. Treats up to 79 litres.
May be used with multiple substances such as oil, radiator fluid or fuel additives. 1-piece tapered, tough, high-density polyethylene for hard-to-reach spots.
Thaws frozen locks of auto doors and trucks, as well as any outdoor and household lock, then prevents locks from refreezing and rusting. Aerosol, carded.
High boiling point gives an extra margin of safety and is designed for safe operation of high-powered vehicles. For ABS, disc, and drum brake systems. DOT 3, meets or exceeds Federal Motor Vehicle Safety Standard 116 and SAE Spec. J1703. 284 degrees Fahrenheit min wet boiling point.
Allows for quicker starts, helps prevent frozen gas lines and absorbs water. Can be used year round in 4-cycle gasoline engines. It will not harm catalytic converters, oxygen sensors or fuel injectors.
Stops leaks, revitalizes old seals, prevents wear, foam and oxidation. In a plastic bottle.
Improves the quality of gas and keeps fuel injectors and intake valves clean. Helps fight the accumulation of harmful carbon, gum and varnish deposits in the fuel system and remove water. Made with jet fuel, a high-quality carrier of active ingredients. Treats up to 21 gallons of gasoline. Use with every tankfull.
Blend of 3 oils that lubricate, clean, protect, and prevent rust. Use on locks, sliding doors, hinges, sewing machines, fans, window tracks, in saw blade cutting, on scissors, drawers, sports and recreation equipment and on the job for small motors.
Flexible to bend and hold difficult pouring angles. Designed for fast pouring, with stabilizing handle. Made of tough, high-density polyethylene, will not rust, dent, or corrode.
High-performance formula designed to lubricate moving parts in and around the house such as window tracks, hinges, valves, wheels, rollers, chains, glides and gears. Displaces moisture, prevents rust and further corrosion. Use on all moving parts. Light vanilla scent. Aerosol can.
Fine quality for home, auto, and shop applications. Use on all metal parts. Clean and easy to use for thorough lubrication and long-lasting protection. Stops rust and corrosion, prevents wear. For tools, latches, hinges, reels, gears, wheels, etc. Long, tapered nozzle on tube permits pinpoint accuracy in applying grease. On a card.
A light grade non-detergent machine oil that lubricates and protects metal parts against wear, tarnish, rust and corrosion, the premium household oil, convenient dropper bottle.
For hand-operated lube equipment only. 4,500 PSI recommended working pressure. Features spring-loaded ball check valve. Fits all 1/8" NPT threads.
Formulated to stop or reduce fluid loss caused by seals which leak due to wear or shrinkage (not for use with broken or scored seals). One treatment helps stop most wear and shrinkage. Can be used instead of regular power steering fluid as preventive maintenance. Compatible with all approved power steering fluids. Helps protect against wear and pump breakdown.
Helps to prevent deposit build up, fight rust and corrosion and remove water to help reduce gas line freeze. Use with up to 21 gallons of gasoline every fill up.
Special blend of high-grade oils equivalent to SAE-20. For electric motors of 1/4 HP or larger, and for outdoor use on guns, fishing tackle, lawn mowers, bicycles, farm, garden and workshop equipment. Non-sliding, will not run off, helps prevent rust and tarnish.
Helps clean entire fuel system, reduces intake valve deposits, increases fuel economy, removes water, fight gas line freeze. 1 plastic bottle treats 1 tank, use in every tank for maintenance.
Defrosts car windows instantly. Helps free frozen locks. Spray in advance to help prevent frost formation.
Penetrates quickly, displaces moisture, reduces friction and wear on moving parts, protects against rust and corrosion. Reduces buildup of dirt, dust, and abrasive particles. Loosens rusted parts, frees sticky mechanisms. Contains high-grade petroleum oils, micronized Teflon, and other ingredients to soften and remove dirt and corrosion, and keep equipment operating at its peak under heavy load, high wear, and severe temperature extremes. Use on bearings, rollers, drive chains, gears, locks, winches, shafts, sprocket housings, cables, tolls, conveyors, bolts, hinges, and cranks. Brown with a mild, fruity odor. Non-staining, safe on metal, wood, plastic, and rubber. Squeeze bottle.
Displaces moisture, non-conductor that can be used to dryout electrical and electronic equipment. Penetrates, loosens and frees stuck, frozen or rusted parts. Lubricates and protects metal against moisture and corrosive elements. Removes grease, grime, tar, gum, crayon, water deposits and more. Dissolves adhesives for easy removal. Silicone-free for no messy, gummy residue. Travel size spray can.
Dramatically improves wet weather driving visibility, with and without wipers. Repels rain, sleet, and snow, frost, salt, mud, bugs and grime.
Provides a thick cushion between moving engine parts to fight friction and protect against engine wear. Use every oil change. Treats 4-5 litres of oil.
Keeps fuel injectors and carburetors clean, restores lost power, reduces exhaust emissions. In a plastic bottle.
Made of tough, high-density polyethylene for dispensing petroleum-based fluids. May be used with substances such as oil, radiator fluid or fuel additives. Includes one each: gray 1/2-pint, charcoal 1-pint, and black 2-quart.
One treatment stops or reduces most fluid loss caused by leaky seals. Conditioners revitalize dried, shrunken, and hardened seals. Mixes with all approved power steering fluid and should be used for preventative maintenance. Meets requirements for GM, Ford, Chrysler, AMC, and most foreign cars.
Unclogs dirty fuel injectors to restore performance and acceleration. Helps dissolve and remove harmful carbon, gum and varnish deposits on fuel injectors. Helps smooth rough idle and eliminate tough starts. Treats up to 21 gallons/79 litres of gasoline. Add to gas every 6,000km or every oil change.